FAILS:
1. sand absorbed most of our water.
2. Oil in water. No fire
WORKING PROCEDURE: DAY 2 10mL fresh water
Fresh water was absorbed by sand
sand can only absorb a certain amount
14 mL of bad water through san
Got almost 14mL of better looking water
DAY 3
5mL of charcoal
10mL clean water and 25mL dirty water
22mL of cleaner water
DAY 4
8mL charcoal
10mL clean water
77 mL dirty water
71 mL of clean water
PICTURES:
Sand set up
Water after sand
Charcoal setup
Water after charcoal
Burning Process
Clean water
Clean water
Dan Chiriani, Christina Carollo, Ava Antico, Joe Carlo
The water is a little clearer. There still seems to be charcoal in it. But the oil is gone. Therefore the second procedure did not work. We are confused with the fact that there are 2 procedures on the lab. Therefore the lab did not work and we would have died if we were left with these instructions after getting back to the island
1. sand absorbed most of our water.
2. Oil in water. No fire
WORKING PROCEDURE:
DAY 2
10mL fresh water
Fresh water was absorbed by sand
sand can only absorb a certain amount
14 mL of bad water through san
Got almost 14mL of better looking water
DAY 3
5mL of charcoal
10mL clean water and 25mL dirty water
22mL of cleaner water
DAY 4
8mL charcoal
10mL clean water
77 mL dirty water
71 mL of clean water
PICTURES:
Sand set up
Water after sand
Charcoal setup
Water after charcoal
Burning Process
Clean water
Dan Chiriani, Christina Carollo, Ava Antico, Joe Carlo
The water is a little clearer. There still seems to be charcoal in it. But the oil is gone. Therefore the second procedure did not work. We are confused with the fact that there are 2 procedures on the lab. Therefore the lab did not work and we would have died if we were left with these instructions after getting back to the island